Remember a while back I wanted to put the large splined PTO on a small splined PTO H.
Someone on here said they IH made an adapter to do just that.
Nebraska Cowman sent me a input shaft for the large PTO and I made an adapter out of it rather than tearing the whole rear end apart to insert the whole shaft.
Here are the 2 shafts.
<a href="http://tinypic.com?ref=qn7eqd" target="_blank">
</a>
I used the shaft on the lower right to make the adapter.
<a href="http://tinypic.com?ref=6psz2s" target="_blank">
</a>
Here"s the adapter.
<a href="http://tinypic.com?ref=25ixikp" target="_blank">
</a>
Has to go into this output in the rear end of the H. Should work.
<a href="http://tinypic.com?ref=10xzlg1" target="_blank">
</a>
Someone on here said they IH made an adapter to do just that.
Nebraska Cowman sent me a input shaft for the large PTO and I made an adapter out of it rather than tearing the whole rear end apart to insert the whole shaft.
Here are the 2 shafts.
<a href="http://tinypic.com?ref=qn7eqd" target="_blank">
I used the shaft on the lower right to make the adapter.
<a href="http://tinypic.com?ref=6psz2s" target="_blank">
Here"s the adapter.
<a href="http://tinypic.com?ref=25ixikp" target="_blank">
Has to go into this output in the rear end of the H. Should work.
<a href="http://tinypic.com?ref=10xzlg1" target="_blank">