OK, you guys have been great about helping me out with my FarmTrac so here is my next issue.
After changing my ring and pinion and getting everything back together, my brakes now squeak, it is a wet brake. The rear sat dry for close to 5 months when I was chasing parts and getting it together. I bought the oil from the dealer I bought the tractor from and he said it was the right stuff. He said the disc dried out and run it for awhile and it should get better. I have put about an hour on it and it has been filled and together for a week. Still squeaks. Did this when new too, but I remember it started out with 80/90 in it and factory came out with a TSB to change to hydraulic/ wet brake oil all was fine after that change out. Any ideas or thought on it getting better after a bit or should I start looking somewhere else.
PS the 200 started right up and we will be putting the plow on it next week to start the garden.
After changing my ring and pinion and getting everything back together, my brakes now squeak, it is a wet brake. The rear sat dry for close to 5 months when I was chasing parts and getting it together. I bought the oil from the dealer I bought the tractor from and he said it was the right stuff. He said the disc dried out and run it for awhile and it should get better. I have put about an hour on it and it has been filled and together for a week. Still squeaks. Did this when new too, but I remember it started out with 80/90 in it and factory came out with a TSB to change to hydraulic/ wet brake oil all was fine after that change out. Any ideas or thought on it getting better after a bit or should I start looking somewhere else.
PS the 200 started right up and we will be putting the plow on it next week to start the garden.
