656 3 Point stuck up position

Anonymous-0

Well-known Member
I recently acquired a 656 with the three point arms stuck in the up position. The rockshaft rotates very slightly when you lift on the arms but I can't get any movement out of the arms with the tractor running. Any tips on where to start while I'm waiting for the SM?
 
Pull the center link boss-plate and check the sensing linkage on the right. Should be "kinda" similiar to this picture.

Sometimes that lower clamp with break down on the torsion rod at the bottom of the housing.

Allan

2je6znk.jpg
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top