(800) 853-2651
SHOP NOW

Valve guides Super A head

just pound them out with hammer and special punch.they come out from top side of head. but yes its machine shop work, unless your set up for it.
 
Is that the same on a Farmall H also to have a machine shop do it or are they different.
 
same deal. the thing is once the guides are changed they are fitted and the seats and valves MUST be ground along with the rest of the related requirements, including new seats or valves as nessesary.
 
Hey Goodman. Where you at? Not many Good men around. I can truthly say that I'm the only GOODMAN here in the Monument, Colorado area (I checked the phone book).
 
If I have the head off should I automatically get the valves ground? The vac tested them and they are "all seating properly" but then he went on to say there could be other problems. Like $135 or $195 depending if it needs valve guides.
 
(quoted from post at 16:31:14 03/24/11) If I have the head off should I automatically get the valves ground? The vac tested them and they are "all seating properly" but then he went on to say there could be other problems. Like $135 or $195 depending if it needs valve guides.
Click to expand...

There will never be a better time to do it. It is my experience that ANY time a head is removed the valves should at least be inspected.
 
You must log in or register to reply here.

Similar threads

B
Distillate Valve Guides
Replies
9
Views
422
D Slater
D
T
2TR15 Valve seats - Other valve Parts
Replies
8
Views
259
TymerTopCat
T
J
1939 F20
Replies
4
Views
359
DeltaRed
D
S
to-30 valve guide installation
Replies
3
Views
685
rustred
rustred
C
Oliver claw hitch guides
Replies
3
Views
326
1970-1655
1
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top