560 diesel oil cooler

scotty-mn · Mar 23, 2011

When I bought the tractor in 2004 the coolant lines were brazed shut on the oil cooler. I bought a used oil cooler and I am going to rehook up the coolant lines but not exactly sure where they go. Any one have a picture or something? Thanks Scotty

Owen Aaland · Mar 23, 2011

Early tractors user steel pipe with a short hose to connect to the oil cooler. Later tractors ran hoses instead of the steel lines.

The lower hose hose starts at the back of the cast elbow on the lower radiator hose. There is a 90° elbow and then either pipe or hose down the oil cooler.

The upper hose goes from the oil cooler up between the generator and block to connect to a horizontal port in the water pump near the cylinder head.

J.J. from Afton · Mar 24, 2011

bedroom-wheatiepics081.jpg" border="0" alt="Nice and clean

</a>

<a href="http://s128.photobucket.com/albums/p168/JJ4h340/My%20560W/?action=view&current=bedroom-wheatiepics098.jpg" target="_blank">

bedroom-wheatiepics098.jpg" border="0" alt=""new" cooler

</a>

560 diesel oil cooler

scotty-mn

Member

Owen Aaland

Well-known Member

J.J. from Afton

Member

Similar threads