Farmall M not charging

Anonymous-0

Well-known Member
1943 Farmall M with an engine overhaul, new wiring harness and new generator and voltage regulator all done at the Case IH dealer. Original 6 volt system. When I got the tractor back it showed a slight charge which went to a slight discharge after 10 to 15 hours. Another voltage regulator did not help. My other two M tractors charge with reckless abandon. I can't figure this one out. Please feel free to offer suggestions. Thanks, Ellis
 
Check that the fan and generator belt are tight.
I have worked on several of that series IH where under charge or no charge problems were just loose belts.
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top