1963 504 wide Front End

Hi Folks does any one know what if any wide front ends will fit besides a schwartz? I understand that they originally had the tie rods in front of the axle? I was looking at a front end from a 340 but didn't know if it would fit or be heavy enough.
 
My 504 has a Speeco WFE.

CIMG1010.jpg


CT
 
(quoted from post at 20:47:07 03/08/11) Hi Folks does any one know what if any wide front ends will fit besides a schwartz? I understand that they originally had the tie rods in front of the axle? I was looking at a front end from a 340 but didn't know if it would fit or be heavy enough.

Schwartz and Speeco are now one and the same. The only other option is a used, original IH. The tie-rods were never out in front on a 504.
 
Yes Charles they were in front on the IH equiped Farmall models. Ronald think the spindels are the same on a farmall 340 and 504 but some other parts are different. Farmall 504 had frame rails along the engine, 340 didn't.
 
I have a Schwartz on my 504, And on the International WFE that i have seen on many 504s the tie rods are infact infront of the axle.
 
My 504 is a 1966 it has a WFE with the tie-rods in back and has no power steering. I have a pic of a 504 with the WFE and tie rods in front, but it has power steering and the hydrolic cyclinder is behind the front end
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top