Dean Olson
Well-known Member
I went to mount the C254 cultivators on my 48 C and found that the 3-
3/4"holes on each side of the front bolster are stripped and or
rounded out. When bought this tractor and it came with a skip row
middle buster. I suspect that it got a lot of use with loose bolts.
Is this a good candidate for a helicoil type repair or should I swap
out the front bolster?
3/4"holes on each side of the front bolster are stripped and or
rounded out. When bought this tractor and it came with a skip row
middle buster. I suspect that it got a lot of use with loose bolts.
Is this a good candidate for a helicoil type repair or should I swap
out the front bolster?