International I4 Tire Question

flic50 · Mar 7, 2011

Hello;

I finally got the old tires off the 24" split rims. They are 12.00 x 24 industrial tires. I measured the width of the rims to be 10" (outside to outside). I am just wondering what sizes others have put on their tractors (I have seen some pictures of ag tires on these tims). I just think 11.2's would be a little narrow, I have that size on my Super A. Any advice is appreciated. Thank you.

rustyfarmall · Mar 7, 2011

12.4x24 would more correct than 11.2. I run 12.4x38 on my H Farmalls with 10" wide rims.

Harold H · Mar 7, 2011

I also have 12.4 industrial tires on my I-4. The rear factory sizes were 11 x 24 or 12 x 24. In modern sizes, 11 x 24 = 12.4 x 24, and 12 x 24 = 13.6 x 24. If you want your I-4 to look original, use an industrial modified grader tread tire rather than a regular farm tread tire.

Harold H

DanTo · Mar 7, 2011

I have 1300-24 grader tires (duals)on mine. I think they look good. What size front tires does yours have?

flic50 · Mar 8, 2011

I got 7.00x20 tires on the front (heavy front end). They are in decent shape at the moment, just mismatched. I am thinking of putting ag tires on, only since I would be using it around the farm. Do you have the 10" rims as well?

Michael Priar · Mar 8, 2011

I just put a set of 13.6-24 on my W4, wide enough but not too wide. I think they look OK.

International I4 Tire Question

flic50

Member

rustyfarmall

Well-known Member

Harold H

Well-known Member

DanTo

Member

flic50

Member

Michael Priar

Member

Similar threads