Super C belt pulley block off plate?

Faster346 · Mar 5, 2011

Anyone know where I could find a block off plate for the rear mounted belt pulley on my Farmall Super C? Are they the same on the standard C? I'd assume so. I'm building a three point hitch for it, and the belt pulley is going to get in the way, so I want to put a block off plate on it. My C that I'm selling has a block off plate and no belt pulley, but I don't want to really get rid of the belt pulley, other wise I'd just swap them. Thanks!!

Bob · Mar 5, 2011

Should be REALLY simple to "fab" if you can't easily find one in a boneyard!

intl385 · Mar 5, 2011

I can sell you for for $40.00, shipping included

Janicholson · Mar 5, 2011

Take the plate off the other tractor and have a CNC plasma torch cut one for it. There should be several manufacturers or machine shops/welding shops that have one. Local vocational schools will want to do it. Jim

504 · Mar 5, 2011

Most just take the pulley off and leave the shaft.

Faster346 · Mar 5, 2011

(quoted from post at 21:16:14 03/05/11) Most just take the pulley off and leave the shaft.

I would if I could, but the location of the hydraulic cylinder is in the way, so the whole unit has to be removed. I'm using the exact 3 point off of my C.

Super C belt pulley block off plate?

Faster346

Member

Bob

Well-known Member

intl385

New User

Janicholson

Well-known Member

504

Well-known Member

Faster346

Member

Similar threads