282d sleeves -who sells .002 oversized sleeves?

NolanJae · Mar 1, 2011

I'm trying to find .002 sleeves but all I can find is .005 over. any ideas?

Janicholson · Mar 1, 2011

THe bore can be easily honed to .0045" to light press fit the sleeve. Sunnen straight hone or equal will do it. Make sure the stones are not worn/tapered used too much. 200 grit would be great. This can be done in frame if protection is given to the crank and journals to prevent contamination. Stamping .005+ in the block would be nice. Jim

NolanJae · Mar 1, 2011

thank you

pete 23 · Mar 1, 2011

Hy capacity sells them, put in a set last summer. Some bores require very little honing with them. Actually a .005 can take quite a bit unless you have a good fluid flow in a tank setup.

282d sleeves -who sells .002 oversized sleeves?

NolanJae

Member

Janicholson

Well-known Member

NolanJae

Member

pete 23

Well-known Member

Similar threads