H front pulley.

David G · Feb 26, 2011

Can I pull the front pulley from an H without pulling the radiator?

Farmall Bob · Feb 27, 2011

Hi David,
I wouldn't make that attemp, as you just may punch a hole in the radiator.
Bob

Wardner · Feb 27, 2011

Don't think there is enough room without removing the bolster. Below is a 400 with the hand crank sleeve pulled back several inches.

<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&current=hydraulicpump013.jpg" target="_blank">

hydraulicpump013.jpg" border="0" alt="Photobucket

</a>

rustyfarmall · Feb 27, 2011

Wardner is right. Removing the radiator won't make a speck of difference. You need to remove the complete front bolster.

David G · Feb 27, 2011

Thanks for the information. I will pull the bolster.

H front pulley.

David G

Well-known Member

Farmall Bob

Member

Wardner

Well-known Member

rustyfarmall

Well-known Member

David G

Well-known Member

Similar threads