(800) 853-2651
SHOP NOW

Farmall 460 fenders

Al L. in Wisc.

Al L. in Wisc.

Well-known Member
Mornin' folks, my 460 is fender-less and looking at my parts book and the CNH online stuff could someone run out and peek at theirs and report back:

part number 51502D BUSHING SPACER, fender

diameter and length of the eight spacer/bushings and thickness if you have one to measure; what size bolts for fenders and hex or square head.

Also, I have heard of an extension plate (not shown on parts list) so fenders can be spaced farther from the tractor seat, thus allowing "expanded drivers" (me is 6"2" 220lbs. and seems to be expanding) more ease in getting on/off the tractor. Ok, now I"m going back to bed. Thanks in advance for your input.
 
I have 460/560 fenders on my Super H, bolted directly to the axle housings. There's plenty of room to maneuver, and I'm not exactly petite if you catch my drift.

I'm pretty sure that the 460/560 fenders were designed to bolt directly to the axles, rather than needing spacers like the H/M fenders.
 
I have a 460D and i bought a set of those fender extensions which are sorely needed!! Im not shure but my fenders look like H or M fenders but the platform and off and on of this thactor is poor as i have seen! Bud & Stinky.
 
You must log in or register to reply here.
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top