leaking M carburetor

Anonymous-0

Well-known Member
I just rebuilt the carburetor on my M and I can't get the adjustment screw on the bowl to quit leaking. Any suggestions?
 
I'm using the packing that came with the kit. I'm not really sure what its made out of. It has the texture of, and feels like felt.
 
I think the small piece of felt that came in your kit is to seal the choke shaft. The only place that I have been able to find the packing that seals the load screw on the IH carb is from Case IH. The part number is 67266DX.
 
(quoted from post at 20:22:22 02/24/11) I think the small piece of felt that came in your kit is to seal the choke shaft. The only place that I have been able to find the packing that seals the load screw on the IH carb is from Case IH. The part number is 67266DX.

The H and M complete rebuild kits I sell do have the correct packing.
 
(quoted from post at 09:23:24 02/25/11)
(quoted from post at 20:22:22 02/24/11) I think the small piece of felt that came in your kit is to seal the choke shaft. The only place that I have been able to find the packing that seals the load screw on the IH carb is from Case IH. The part number is 67266DX.

The H and M complete rebuild kits I sell do have the correct packing.

What do you charge to rebuild one and send it back?
 
I bought a kit on eBay from bakt4kids which included the correct seal. I think that markscarb, also on eBay has the correct kit. Hope this helps, Bob in Texas
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top