'45 farmall B

Gene Reynolds · Feb 23, 2011

Governor housing speed control lever shaft and matching hole bore are badly worn resulting in inability for speed control. Internal gearing new. Thoughts on repair techniques or source for housing replacement?

old · Feb 23, 2011

I probably have that part laying around. I just last fall built a BA from 2 Bs and an A so have a good number of parts on hand. E-Mail is open

sflem849 · Feb 23, 2011

The only things I have been able to think of are welding the hole shut and boring a new one or drilling it out and using a bushing.

teddy52food · Feb 23, 2011

Take it to a good machine shop. They will bore it out & put a bushing in to fit the shaft.

gene bender · Feb 23, 2011

I fasten them in the milling machine and bore them with a 5/8 thats undersized then press a 5/8x1/2 brass bushing and they run like a new one again.

sflem849 · Feb 23, 2011

What do you do for all the worn rods that go in these egged out holes?

scotc · Feb 27, 2011

The guy that did my B reamed the hole back out round, bushed it, then welded the shaft up and turned it back down.

'45 farmall B

Gene Reynolds

New User

old

Well-known Member

sflem849

Well-known Member

teddy52food

Well-known Member

gene bender

Well-known Member

sflem849

Well-known Member

scotc

Well-known Member

Similar threads