60 front blade questions

couv · Feb 22, 2011

seems like the part #1 in the diagram, #650312R1, Arm, Hydraulic Extension,

would come precariously close to a foot on the clutch pedal when the rockshaft rolled backwards to lift the blade.

Why is it so long toward the operator ?

Paul Shuler · Feb 22, 2011

You can see that the bracket your talking about is a little different then the one on my Super C blade.

Paul Shuler · Feb 22, 2011

sorry here is the pic I hope

Anonymous-0 · Feb 22, 2011

The extended end is for raising and lowering when used as a grader blade mounted under the belly. These are installed on many IH models similar to the SA and I know of no problems. It pivots at the center point of the rockshaft, so at any point below level with the rockshaft, it is moving further away from the pedals.
I guess if you did have an interference problem, it may indicate a clutch problem or adjustment.
K-Mo

60 front blade questions

couv

Member

Paul Shuler

Member

Paul Shuler

Member

Anonymous-0

Well-known Member

Similar threads