Super A Clutch/Transmision Noise

flic50

Member
I have been watching with interest recently with the Super A tranny questions. My Super A makes a chirping/grinding noise as I let the clutch out, but stops once the clutch is all the way out. It does this in all gears. I replaced the clutch around 7 years ago, all new and had the flywheel turned. I keep on an the grease fittings and fluid levels. I pulled off the tranny cover and looked in, the gears all apear to be alright, from what I could see.
Thank you for the help.
 
Sure sounds to me like a throw-out bearing going bad. 'All gears and goes away after chutch is realeased'. Throw out bearing is the one common component.
 
Could be throwout bearing but my guess would be pilot bushing is dry. It creates enough drag on the driveshaft to make it "jump". The resulting noise will transmit to rear of the shaft and sound like a transmission noise.
Don
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top