Truck engine into Tractor

RGMartin · Feb 16, 2011

Will a DT466 out of a truck or bus bolt into a 4166(436)? Will a 414 out of a 915 combine?

The 436 is completely beyond repair, oil plug vibrated out and it seized up.

Owen Aaland · Feb 16, 2011

The basic engine will fit but you may need to to change a lot of exterior parts such as the front and rear mounting plates, manifold(s) injection pump. oil pickup tube and oil pan.

mkirsch · Feb 17, 2011

Yes, you will need to strip the truck engine down to the long block, and bolt all the tractor parts off the DT436 on to the truck engine.

They're the same block, but the mounts and accessories are completely different.

RGMartin · Feb 17, 2011

Thanks, that is what I figured, but wanted to make sure before I bought any parts.

My wife might freak out if she came home to a school bus sitting in the drive with no good use for it.

sflem849 · Feb 17, 2011

(quoted from post at 07:09:51 02/17/11) Thanks, that is what I figured, but wanted to make sure before I bought any parts.

My wife might freak out if she came home to a school bus sitting in the drive with no good use for it.

You could always make it a cattle hauler

RGMartin · Feb 17, 2011

(quoted from post at 10:34:57 02/17/11)

(quoted from post at 07:09:51 02/17/11) Thanks, that is what I figured, but wanted to make sure before I bought any parts.

My wife might freak out if she came home to a school bus sitting in the drive with no good use for it.

Click to expand...

You could always make it a cattle hauler

for that matter I could tell her it was the new station wagon. She told me she wanted another baby... Don't think another will fit in our current car

Truck engine into Tractor

RGMartin

Well-known Member

Owen Aaland

Well-known Member

mkirsch

Well-known Member

RGMartin

Well-known Member

sflem849

Well-known Member

RGMartin

Well-known Member

Similar threads