Amp meter reading

Anonymous-0 · Feb 11, 2011

My farmall M 6 volt amp meter show a discharge all the time, if I rev up the engine it shows more discharge. The amp meter is hooked up correctly and I have checked it with another meter. To generator was rebuilt be a shop in town that I have used before and show an out put.
Anyone got suggestions on what the problem might be?

rustred · Feb 11, 2011

may need to polarize the generator, momentarily touch batt. terminal to arm terminal on regulator with a piece of wire.

John T · Feb 11, 2011

BOTH That supposed repaired genny as well as the Voltage Regulator or Cutout Relay require a good ground ya know and the genny needs Polarized as posted below. If that dont help Para 5 of my Troubleshooting procedure tells how to full field the genny to see if non charging is a Genny versus a VR or Relay problem.

http://www.ytmag.com/cgi-bin/viewit.cgi?bd=farmall&th=665110

John T
John Ts Troubleshooting

teddy52food · Feb 11, 2011

Do you have the battery in with the + (positive) grounded? Did the rebuilder run it + ground?

Amp meter reading

Anonymous-0

Well-known Member

rustred

Well-known Member

John T

Well-known Member

teddy52food

Well-known Member

Similar threads