706 lift arm replacements/rebuild

GeneMO · Feb 1, 2011

Some time back I mentioned that my lift arm ball/ sockets were worn out, and seems like someone said they had access to replacements that could be welded on the original lift arms.

If someone can steer me to some information on how to rebuild these I would sure appreciate it.

Thanks, Gene

DeltaRed · Feb 1, 2011

you can buy replacement weld-on balls at your local farmsupply store or imp dealer.There are different styles available.Just cutoff the old balls and weld on the new ones.

rustyfarmall · Feb 2, 2011

(quoted from post at 22:27:53 02/01/11) Some time back I mentioned that my lift arm ball/ sockets were worn out, and seems like someone said they had access to replacements that could be welded on the original lift arms.

If someone can steer me to some information on how to rebuild these I would sure appreciate it.

Thanks, Gene

Gene, is it a factory 3 point? Can you remove the ball socket assembly from the lift arm? If so, there is a much easier way than those "weld-on" sockets.
[email protected]

706 lift arm replacements/rebuild

GeneMO

Well-known Member

DeltaRed

Well-known Member

rustyfarmall

Well-known Member

Similar threads