WD-9 rear wheel weights

mib61

Member
I am looking for some rear wheel weights for my 9 and they seem to be rather hard to come by. I don"t want to use fluid in my new tires and tubes if at all possible....I would like about 800 lbs of cast.
also what do they weigh per unit.
 
i have weights for my 9 series, i think they are around 200-220 lbs each. dang heavy tho, never weighed them myself. they are hard to find, but they are out there.
 
Parts book say 140 lbs.

You should include your address when looking for heavy parts. I have alot more than the sixteen weights on the tractor pictured below. I won't be able to count them until spring. By tomorrow night they will be under four feet of snow. I am in eastern MA.

<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&current=gates048-1.jpg" target="_blank">
gates048-1.jpg" border="0" alt="Photobucket
</a>
 
That's a 900 lb drop hammer and a 25 ton horizontal wood spliter/press brake. Both attach to a forklift mast.

<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&amp;current=gates068.jpg" target="_blank">
gates068.jpg" border="0" alt="Photobucket
</a>
 
lots of guys are going with windshield washer antifreeze up here. Tractor looks clean and no corrosion on the wheels.

get it on sale at walmart for $1.5 a gallon , a little less than 10 lbs per jug so 42 gallons per side 800 lbs total.

I have not done it yet but at the tractor club it is very popular.

George
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top