super h pump

crystal allis · Jan 27, 2011

hi i just picked up a super h pump to put on my h i also have the timing cover with which to install it but alas the top of the pump that the hoses connect to i do not have and i am wondering where does one look for this item if anyone can point me in the right direction i would be most grateful thanks Scott

crystal allis · Jan 27, 2011

also i was wondering what the gallons per minute of the pump would be an also what would the pressure of it be thanks Scott

Janicholson · Jan 27, 2011

I believe you will find the block pretty easily. Or have one made for jis or pipe thread hoses.
The reason I post is to remind you to be sure to replace the cam gear with one from a SH or 300/350.
The H gear is weak. Jim

crystal allis · Jan 27, 2011

i got the gear that is on the pump from a super h. what you are saying is to replace the gear on the cam shaft also correct? thanks Scott

glennster · Jan 28, 2011

definately replace the cam gear with the heavier super h/300 gear. the old style h gear is a lot lighter and will not stand the strain from the live pump. for the port block, steiners or oem has em. they sell the heavier gear on this site also.

glennster · Jan 28, 2011

should be about 10 gpm, 1200 psi at around 1600 rpm

super h pump

crystal allis

Member

crystal allis

Member

Janicholson

Well-known Member

crystal allis

Member

glennster

Well-known Member

glennster

Well-known Member

Similar threads