McCormick 31 loader cylinder packing

John Lundberg · Jan 25, 2011

Does anyone know where you can buy new packings for a McCormick 31 loader?

GeneMO · Jan 25, 2011

(quoted from post at 07:09:10 01/25/11) Does anyone know where you can buy new packings for a McCormick 31 loader?

I would think that any good shop that rebuilds cylinders could come up with it or make it.

Gene

MisterT · Jan 25, 2011

(quoted from post at 15:09:10 01/25/11) Does anyone know where you can buy new packings for a McCormick 31 loader?

Just a few short years ago a friend of mine found those packings at the local Case-IH dealer. Might have been new old stock, but it wouldn't hurt to check with your local dealer.

armand tatro · Jan 25, 2011

Where are you located? There are some good cyl. repair shops in the Kankakee/Gibson City, Il. area. Like they say on the I Forge Iron forum we need to know locations so We know whether or not to try to provide help. Armand

John Lundberg · Jan 25, 2011

Thanks

John Lundberg · Jan 25, 2011

Thanks Gene

bc · Jan 25, 2011

First you will have to take it apart to see what style packing they used. There are a number of styles. Any repair shop will need to know that. The tube, shaft, and piston sizes are probably a standard size.

Ed Hotaling · Jan 25, 2011

A couple of years ago I got the parts from my CNH dealer. I cost about $50.00 per cylinder to replace all the parts. It was fairly easy to do; the trickiest part was catching the old oil that came out when I disassembled them. If you need any advice, feel free to e-mail me.

McCormick 31 loader cylinder packing

John Lundberg

Member

GeneMO

Well-known Member

MisterT

Member

armand tatro

Well-known Member

John Lundberg

Member

John Lundberg

Member

bc

Well-known Member

Ed Hotaling

Member

Similar threads