danny m burns
New User
can someone give me a phone number or e-mail addrees of a person or company that cam completely rebuild a farmall cun 1950 model 6 volt magneto---that does know what they are doing -please
- Thread starter danny m burns
- Start date
Janicholson
Well-known Member
Magnetos do not get voltage. If you put voltage to it with a jumper, or wired it that way, it is wrong. Magnetos make their own internal voltage and it is not measured (ever if you are a user, and almost never if you repair them).
There are several on here that will help find a rebuilder for your mag. Jim
There are several on here that will help find a rebuilder for your mag. Jim
A mag doesn't require battery voltage. Your battery is only needed for starting and lights.
Your mag can makes it's own hot fire. Call Standard Magneto at 1-800-624-6386 to see if they can rebuild your mag. Hal
PS: When you remove your mag note where your rotor is pointing and make a sketch where its pointing. Then don't move the engine once the mag is off. Then when you get the mag back just rotate the rotor that's shown in the sketch and install it. This is so your mag will be in time.
Your mag can makes it's own hot fire. Call Standard Magneto at 1-800-624-6386 to see if they can rebuild your mag. Hal
PS: When you remove your mag note where your rotor is pointing and make a sketch where its pointing. Then don't move the engine once the mag is off. Then when you get the mag back just rotate the rotor that's shown in the sketch and install it. This is so your mag will be in time.
teddy52food
Well-known Member
I can rebuild it in central Mn. Where are you?
old
Well-known Member
- Location
- Camdenton Missouri
Never was and never will be a 6 volt mag. Mags make there own spark with out a battery. So what do you have?? A distributor uses battery power but a mag does not and the tractor will run with out a battery. Hard to rebuild something with out know what it is
Nebraska Kirk
Well-known Member
I can rebuild your magneto, send me an email, [email protected]
rustyfarmall
Well-known Member
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy