Rebuild of Steering on Super A

Mark W. · Jan 4, 2011

Does anyone know of where to get the rebuild kits for the steering on a Super A? I remember seeing kits a while back with seals and a bearing. It is leaking from the front nut and I need to get it stopped. Steering is tight otherwise. Thanks

gene bender · Jan 4, 2011

If there isnt and end play when you turn the wheels the bearing is good. Now the procedure is replacing the nut a sealent should be used to keep the threads from leaking. Teflon tape should work. Iv had good results after rebuilding. I have done several bushings seals and the bearings. Woodruff key on the gear sometimes is worn but if thats all the problems you have the tape should do it.

Mark W. · Jan 4, 2011

Thanks Gene. There is very little play so I think I will just use your teflon tape idea.

Hobo,NC · Jan 4, 2011

I still have them if needed. I also put together some tips that have been posted hear and from my experience but you will have to look for them in the archives, Email open.

Rebuild of Steering on Super A

Mark W.

Member

gene bender

Well-known Member

Mark W.

Member

Hobo,NC

Well-known Member

Similar threads