(800) 853-2651
SHOP NOW

SW6TA constant mesh gear

T

toymaker 27

Member
54 teeth, 9 1/8" in dia, splined centre hole.
Rust has eaten away two teeth and damaged another 9. any idea where I may be able to find a replacement? if you have one with good teeth but wrecked splines my machinest says he can combine the two.
 
Should be able to find a good used one at a reasonable price at lots of places. Same gear was used in SMTA, 400,450 tractors and others.
Probably have a couple of extra ones myself.
 
I have one as well. I'm in eastern MA. There have been a number of them on eBay recently. One would have think that other countershaft gears are also rust damaged. Maybe even the bull gears and IPTO driven gear. I have all that stuff. You may be better off installing a complete rear frame from a similar tractor although some of the ratios will be slightly different in the row crops.
 
Would you have a spare steering arm? The arm on my TA has been welded and now has a slight curve in it (as compared to the arm on my SW6 that is straight). The piece I am refering to is the shaft that pushes the long rod that goes to the front wheels. Pictures can be sent for clarification if required.
 
You must log in or register to reply here.

Similar threads

F
Has anyone changed Mitsubishi BD2G bevel gear shaft seals?
Replies
6
Views
2K
AJ.
A
G
TO20 Rusted Frozen Draft Control Spring
Replies
5
Views
1K
Tom H.
T
R
Step-by-step steering box repair, YM1301D
Replies
0
Views
21K
jtw37-HT
J
T
Constant mesh gear SW6TA
Replies
0
Views
970
tractorboy 57
T
C
Bush Hog 3126 o (offset) 70548 gear box issues
Replies
5
Views
7K
chickenfriend
C
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top