w9 axel question

Binderboy06 · Dec 21, 2010

is there a secrete to getting the axel spacer off to change the axel seals on a w9/wr9?

Wardner · Dec 21, 2010

Sometimes they don't come off unless you reach into PTO opening, remove bullgear from axle, remove axle housing from rear frame, and deliver the assembly to a big stationary press. The bottle jack below is 12 ton. Your milage may vary.

<a href="http://s140.photobucket.com/albums/r16/Wardner/?action=view&current=I-9034.jpg" target="_blank">

</a>

Binderboy06 · Dec 21, 2010

I GOT THE AXEL OFF THE TRACTOR BUT I CAN GET TO THE SEAL .I BROKE THE CAST PIECE BEHIND THE SPACER USING A PRESS

Charles E. McNelly · Dec 22, 2010

I assume there similar to a W6. If you have already taken the cast wheel center off and pulled the axle out of the tractor, then all you need is a torch with a rosebud. It takes some heat to remove the coller. That's what I did on my W6 and it seemed to work very well. You cannot mess anything up considering your replacing the seals anyway. Take a little time and clean the axle well and the coller will slide on easily during reassembly. Wish I would have taken more pics, your the second person to ask in a couple months.
Charles

w9 axel question

Binderboy06

New User

Wardner

Well-known Member

Binderboy06

New User

Charles E. McNelly

Member

Similar threads