(800) 853-2651
SHOP NOW

460 hydraulics

T

Tater Head

Member
Wanting to get rid of all the hydraulics on a farmall 460 EXCEPT the power steering. I have already removed all the controls and valves. My question is, can I block the cast upright where the spool valves bolted on and make that work, or will the pump not drain back into the system causing the pump to be in a bind. I thought about trying to just route the pressure line to the belt pulley delete cover and dump it in there. Please let me know your ideas. Thank you in advance.
 
I do not know why that would not work................I believe the power steering is separate (same oil). Do you want to sell your hydraulic block? My email is open.
 
If you take the idler gear out of the hydraulic pump then the only return oil you will have will be the power steering. You could remove the hose from the side of tractor and block it off there.
 
(quoted from post at 15:18:28 12/21/10) With all the trouble sealing and getting the hyd system primed would you still move enough oil?? Bud.
Click to expand...

Since he wants to eliminate the hydraulic system the amount of oil he wants to move is none. Removing the idler gear from pump will accomplish that.
 
You must log in or register to reply here.

Similar threads

J
Case 310G dozer hydraulic problems
2 3
Replies
49
Views
3K
Jonathan Thomas
J
L
1966 John Deere 2510 jittery Hydraulics
Replies
15
Views
918
Harry in Ky
H
T
Loader hydraulics MF202
Replies
2
Views
376
todintexas
T
W
One-armed loader on 861; hydraulics ?
Replies
2
Views
293
William Fissell
W
T
B275 Loader Hydraulics
Replies
10
Views
578
TheBrick
T
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top