Anonymous-0
Well-known Member
Is there anyway short of a torch and welder to mount a 460 fasthitch on a 400? Some sort of adaptor either IH or aftermarket?
- Thread starter Anonymous-0
- Start date
The only things that need changing are side plates and belly bracket. In other words, only those parts that attach to the tractor frame.
I would never waste my time making stuff that was widely available and cheap.
There have been several sets of those brackets offered for sale by eBay vendor "marty2347" from Bad Axe, MI in the past several months. Those parts may not have sold. eMail him. I'll bet you won't spend more than $50.
I would never waste my time making stuff that was widely available and cheap.
There have been several sets of those brackets offered for sale by eBay vendor "marty2347" from Bad Axe, MI in the past several months. Those parts may not have sold. eMail him. I'll bet you won't spend more than $50.
Janicholson
Well-known Member
460 is a small frame tractor (H) 400 is a Large frame (M) Are they that compatible? Jim
Chester5731
Member
Just be very careful when dealing with marty2347. Do a search in the buyer seller feedback. I have not had great luck dealing with him myself.
Chester,
I don't like the guy either. His photos are terrible and his descriptions non-existent. Moreover, the item titles are either vague or wrong. And he doesn't answer emails.
On top of that, he will ship defective parts without warning. I have had to repair some of his crap.
What really bugs me the most is I have a feeling if an item doesn't sell (probably higher than 50% of his listings), it goes into the dumpster as scrap.
So why do I do business with him? Well, he has what I need and it is always cheaper than anyone else. He gets few bids and that is probably a reflection of his business style. He could gross alot more with an attitude adjustment.
I don't like the guy either. His photos are terrible and his descriptions non-existent. Moreover, the item titles are either vague or wrong. And he doesn't answer emails.
On top of that, he will ship defective parts without warning. I have had to repair some of his crap.
What really bugs me the most is I have a feeling if an item doesn't sell (probably higher than 50% of his listings), it goes into the dumpster as scrap.
So why do I do business with him? Well, he has what I need and it is always cheaper than anyone else. He gets few bids and that is probably a reflection of his business style. He could gross alot more with an attitude adjustment.
Stephen McCoy
Member
Is there a reason you're not just going with the correct hitch for a 400?
Is it because you already have the one for a 460?
Or can get one for a 460 for very little $$$?
I'm just curious because I know that complete units usually sell for around $500 and you could just get the correct one.
I would also agree with all the previous post about acquiring the correct side and belly hardware. Again, my 2 cents worth.
Is it because you already have the one for a 460?
Or can get one for a 460 for very little $$$?
I'm just curious because I know that complete units usually sell for around $500 and you could just get the correct one.
I would also agree with all the previous post about acquiring the correct side and belly hardware. Again, my 2 cents worth.
I made an error on Marty's handle. It is marty2374.
Below is a link to one of his auctions. Click on his name to email.
one of Martys auctions
Below is a link to one of his auctions. Click on his name to email.
one of Martys auctions
I made an error on Marty's handle. It is marty2374.
Below is a link to one of his auctions. Click on his name to email.
one of Martys auctions
Below is a link to one of his auctions. Click on his name to email.
one of Martys auctions
Anonymous-0
Well-known Member
I have looked in parts catalog & very little interchangeable from 460 to 560, couldnt remember for sure but it confirmed my fear that slightly smaller rear frame casting between the 2, bolts smaller, just enough different to be far from a bolt-on. H/300/460 all evolved together in casting sizes, same for M/400/560.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy