Basket Case H

Anonymous-0

Well-known Member
Was able to get all pistons out, but need to remove engine to get crankshaft out. I have never done this, but if you separate frame rails and bolster as one unit from rear of tractor, will engine block hang on the rear plate until it is lifted off with hoist? Just need clarification on this. Thanks for any and all replies.
 
Yes. You will have to loosen the frame rail bolts on at least one side of the bolster to allow some "wiggle" room. BTDT
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top