tank type connection?

tn terry t · Dec 3, 2010

iffin a feller was to come up with one of those tank type heaters (Kat brand comes to mind) where would you 560D owners hook it up at? i have my idea where to install it just wondering where everyone else would

Thanks
Terry T

Bob · Dec 3, 2010

Unless you are in a LOT colder area than it appears by your "handle" and need 1500 Watts, make it EASY and simply install a 600 Watt "freeze plug heater" in the third block plug hole from the front on the right side. Phillips&Temro # is 3100061

tn terry t · Dec 3, 2010

its just that i' ve had good luck with the tank type and thats all i know ill take a look at that one you told me about. I have one of the Kats on a 80 model ford truck I used to run fire calls with it it could be zero degrees and soon as you hit the key the window would start defrosting

thanks friend
terry t

Bob · Dec 3, 2010

If you need to use the tank heater, typical connection would be between the block drain port and a port in the cylinder head or thermostat housing below the thermostat.

tank type connection?

tn terry t

Well-known Member

Bob

Well-known Member

tn terry t

Well-known Member

Bob

Well-known Member

Similar threads