706

michaelsp230 · Nov 30, 2010

706 pulls in rev. only . any idias . thangs for any info .

michaelsp230 · Nov 30, 2010

opps. messed that all up . 706 only pulls in reverse . any info would be helpfull . thanks

Owen Aaland · Nov 30, 2010

Most likely a broken shift rail for the high/low shift fork. The rail breaks where the locating screw goes through and the rear piece slides back and the fork falls down. It can be replaced from the back through the hole in the rear frame above the PTO once the range transmission cover is removed.

michaelsp230 · Dec 1, 2010

Thanks for the info . that will help

706

michaelsp230

Member

michaelsp230

Member

Owen Aaland

Well-known Member

michaelsp230

Member

Similar threads