(800) 853-2651
SHOP NOW

1086 gas cap

I don"t think so.
The 806 and the 656 should be the same cap but I don"t think they will fit the 1086.
 
(quoted from post at 19:01:24 11/27/10) Hey guys, Is the gas cap off of an 806 interchangeable with a 1086? Or maybe with a 656?


Thanks,

Cole
Click to expand...

If I'm reading my catalog right, the fuel caps are pretty much interchangeable all the way from the letter series Farmalls up through the 1066, but there must have been a change after that.
 
Rusty if you put a standard "tall" gas cap off a 1066 on a 1086 the rear cab window will not open.

The 1086 takes a low profile cap.

Diameter is the same I believe.
 
(quoted from post at 06:40:11 11/28/10) Rusty if you put a standard "tall" gas cap off a 1066 on a 1086 the rear cab window will not open.

The 1086 takes a low profile cap.

Diameter is the same I believe.
Click to expand...

The aftermarket caps that I was looking at were of the low profile variety and they are listed as fitting up to the 1066 as well as a whole host of combines, but the 1086 is not listed, so I assume there is something else different? I really don't know, and I won't even pretend to be an expert.
 
Yep,

However, think as far as fitting the tank neck, all those old binders' caps will interchange from about 1947 forward.

Trucks to tractors to pickups to machinery. :>)

Allan
 
I lost the cap on my 886 this Fall, and I had an extra one for an M on the shelf. It fits fine, but the back window will not open due to the taller cap. I'll have to get a low height one by spring I guess.
 
(quoted from post at 08:16:30 11/28/10) I lost the cap on my 886 this Fall, and I had an extra one for an M on the shelf. It fits fine, but the back window will not open due to the taller cap. I'll have to get a low height one by spring I guess.
Click to expand...

Thank you for that input. Good to know.

For what it's worth, the IH fuel caps will interchange across several different BRANDS of machinery also.
 
86 series fuel tank cap has no breather hole in it as the tank vents through the tube off top of fuel gauge sending unit with a hose that loops up inside of cab leg.
 
You must log in or register to reply here.

Similar threads

R
IH 1086, the fuel will leak off if it sets a couple days making it hard to start. What do I need to do to fix it. Thanks.
Replies
4
Views
273
caterpillar guy
C
A
IH 1086 PTO drive bear replacement
Replies
2
Views
88
Ayden
A
J
mcv flow divider valve
Replies
3
Views
276
rustred
rustred
C
IH 1086 Temp gauge
Replies
2
Views
172
Mrfred54
M
formerly ny bill
replacement LED bulbs
Replies
6
Views
590
BarnyardEngineering
BarnyardEngineering
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top