Anonymous-0
Well-known Member
I have a W9 carb that is complete with the exception of the metering stem. Will the one from an 806 fit? Also if you order a carb kit, does it come with the metering. stem?
- Thread starter Anonymous-0
- Start date
rustyfarmall
Well-known Member
I don't think the 806 metering stem will work in the W9 carb because of how it installs. The metering stem in a typical Farmall M, W6, W9 carb goes all the way through and is held in place with the metering stem clamp nut.
The metering stem in an 806 carb is threaded up at the top and does not go all the way through.
A "complete" carb kit does come with a new stem, but I don't know if there is such thing as a "complete" kit for the W9. The complete kit for a Farmall M will work, although you may need to drill out and slightly enlarge the holes in the metering stem.
Anonymous-0
Well-known Member
U guys ever seen one of these?
rustyfarmall
Well-known Member
Yes, I've seen quite a few of those, but they did not have the sleeve in the bore as those in the pictures appear to have.
Anonymous-0
Well-known Member
Good Eyes! Its a repair kit. ChadS
rustyfarmall
Well-known Member
What does the repair kit consist of?
Anonymous-0
Well-known Member
Throttle shaft, butterfly,instructions, and the repair sleeve.
The repair sleeve fixes your passages that have become damamged during the enhancement process, or just a repair for a carb that is severly pitted.
Carb will need to be machined to fit.
These are 1.70" ID M and a 300 carb. Stock is 1.440
Its not something I intend on massproducing,,, But seen the post where you had a carb that was in the junk pile,, maybe this type of repair can bring it back to life???... Chad
The repair sleeve fixes your passages that have become damamged during the enhancement process, or just a repair for a carb that is severly pitted.
Carb will need to be machined to fit.
These are 1.70" ID M and a 300 carb. Stock is 1.440
Its not something I intend on massproducing,,, But seen the post where you had a carb that was in the junk pile,, maybe this type of repair can bring it back to life???... Chad
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy