Hydraulic distrubutor type pump

Anonymous-0

Well-known Member
My 46M now has fulltime hyd. but I don"t have any manuals on how to hook up the plumbing. I have a little reservoir tank that bolts under the gas tank and in front of the steering support column. Also I have found a belly hyd pump and installed it as well but the control lever system that sits above the system has many inlet and output holes but which is which? Anybody got any experence with this or have a manual picture? Sure could use some help. THX Folks
 
First,

Go back in the belly and remove that drive shaft coupler to the belly pump. Then, remove the belly pump lever.

Tie the belly tank to your "extra" tank for more capacity.

Put a "T" in the belly tank drain plug.

Mount a separate control bank up at the headlight bar.

Input hose of the live pump goes to one side of the "T" and the return of the control bank to the other side.

Output of the live pump goes to the inlet side of the valve bank.

Lastly, forget the three original outlets from the belly pump and just hook your "work" hoses to the control valve.

Allan

roundtank2.JPG


valve.JPG


3.JPG
 
Allen--that's a very nice setup!

Just wondering--you wouldn't happen to have a close-up picture of the valves mounted on the light bar?
 
This is the only one I could find of the valve.

If ya need a better view, I could snap another when I'm out feeding this morning.

Allan

1.JPG
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top