350U adding remotes

JSB · Nov 17, 2010

I have a 350U with a 3 point hitch, I am in need of adding a set of remotes. Which ports are live and return or what is the best way for the addition.
Thanks

Janicholson · Nov 17, 2010

The front right side of the seat platform has a plate covering the access ports for remotes. The valves are the same as the existing valve, and are available from several sources including salvage yards. The valves need to be compatible with the X00 X50 series farmalls. Jim

JSB · Nov 17, 2010

Alright, the tractor has 2 hydro levers on the right, I see the access plate (at the rear lever) it has 2 ports with plugs on top, and the access below has 2 lines for the 3 point and 2 ports with plugs. So can I use the existing setup/ports or do I need other parts.
Thanks

Janicholson · Nov 17, 2010

The valves stack against one another. The fender gets in the way of more than two in each stack. It is my belief that this system is not a ture open center, and needs pilot valving and the use of the correct valves. A hydro touch manual for the tractor or series is a good idea. Jim

Todd Stauffer · Nov 18, 2010

I beleive I would have everything you would need to add remotes I"ll look this morning If you want to give me a call (785)966-2739 days or (785)966-0038 eves

350U adding remotes

JSB

New User

Janicholson

Well-known Member

JSB

New User

Janicholson

Well-known Member

Todd Stauffer

Member

Similar threads