A-91 Plow Mounting

Anonymous-0

Well-known Member
Can anyone tell me where the brackets bolt to or send/post pictures? My email is [email protected]

I think I have the bracket on the platform figured out, and the wishbone that mounts to the back of the steering gearbox. I also think I figured out the back brackets that hold the rockshaft but I have some questions. I think they mount in the top drawbar mounting holes. Do they mount inside or outside the casting? Where does the top attach? Right side appears to attach to seat bracket but the other side has one piece that bolts horizontally and one piece vertically. The one piece appears to bolt to the top of the transmission case where my cultivator lift is currently but the other one I can't figure out. Fender mounting hole? Or bolt holding the final drive to differential?

What about the lever that mounts to the torque tube? Does it go in the front holes or back? Where does it connect to the plow and how? I have a rod with a 90 degree bend on one end and a flat iron with holes in it that I can't figure out where each goes.

If anyone can help me I appreciate it.

Thanks
Mike
 
This pic was taken in 1976 with a Poloroid camera
and I took a picture of the old photo with a digital camera to make it clearer. You can see most of the brackets where they connect to the tractor. Hope it helps you. Hal
16l9zl4.jpg
 
Saw this one at a show this summer.
Your handle will mount on the torque tube like this.
You're piece with the 90 deg. bend fits into the flat plate coming up from the front of the plow frame.
a25633.jpg
 
Adrian,

Thanks for the help. My plow is a slightly older model with no spring up front, though.

Mike
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top