What loader is this?

Does any one have an idea what loader this is? Its mounted on my 44 H. It seems to have yellow paint on the lift cylinders
a25120.jpg

a25121.jpg
 
Nice looking loader, probably the only one I"ve seen so far that looks ok on an H!

What is that handle mechanism on your draw bar? I think I"ve heard it called something like a hill hitch?
 
The over-the-top trussing on the arms makes it looks like a Twin-Draulic.
I have one Dad bought for his Super A in the early 50"s. (I posted a picture some time ago; search for Twin-Draulic).
They were built in Laurens, Iowa, but the company has been out of business for at least 30 years. They made loaders for a wide variety of tractors.
If it is a T-D & has not been stripped & repainted, you might find remnants of the Twin-Draulic logo on the webbing of the main arms. The model number was usually stensiled on the inside (engine side) of the main arms. There also should be a serial no. plate on it somewhere. On the Super-A/100 model, it is on the main frame.
I"ve never seen one for an H. Thanks for posting the pictures.
 
The lever on the drawbar is a "Sidehill Lever" and was very usefull when plowing in hilly fields to keep the plow cutting the proper width when plowing across sidehills. I had one and it worked good on my H that I plowed a lot with back in the late 1940's and early 1950's. I used it when pulling other implements too, especially the corn planter to keep it centered behind the tractor on sidehills.
 
in the looks department, a 33a McCormick loader looks similar on an H/M. Also similar construction, but the IH has smother lines.

karl f
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top