Reassembly Question

Anonymous-0 · Oct 27, 2010

Ready to put my tractor back together after installing rear main seal. Should I (can I) put it together with the transmission shaft in place, or should I remove shaft and put back in separately?
I work alone and don't want to make any mistakes.
Thanks for any responses.

CNKS · Oct 27, 2010

Hard to say unless you name the tractor and what you have done to it.

pete 23 · Oct 27, 2010

Seems to me it was a MD you are working on. You can leave transmisson shaft installed and just guide it into clutch as you push her together. If the belly pump is out it is easy, if not little more difficult, just don't force anything.

Anonymous-0 · Oct 27, 2010

Thanks, it is an MD. Sorry I didn't say so. Belly pump is out, so if I realign clutch, it should go together with shaft in, correct?

Anonymous-0 · Oct 27, 2010

Sorry, it is an MD. I'm thinking that with correct clutch alignment, tractor should go together with transmission shaft already in, but am not quite sure. Don't want to force anything.

Reassembly Question

Anonymous-0

Well-known Member

CNKS

Well-known Member

pete 23

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

Similar threads