140 with cultivator and fast hitch

Jg20601

Member
In looking over IH 140 pics here and elsewhere I noted that tractors (including one parked for sale about 2 miles from me) have both the 1 point fasthitch and the cultivators on at the same time.
To get more clearance, you pull the 3 pins holding the fasthitch on, take the draft link off the bail and attach the bail to the bracket near the brake pedals.
Will add pics tomrrow night.

(and dont forget where you put the two parts..)
 
front pins
<a href="http://s1007.photobucket.com/albums/af192/J20601/?action=view&current=1023101003c.jpg" target="_blank">
1023101003c.jpg" border="0" alt="frt fast hitch pin
</a>
 
trailer ball bracet for fast hitch 520095 r2 Cub websites have a replacement bracket for sale that should fit the 140 as well
<a href="http://s1007.photobucket.com/albums/af192/J20601/?action=view¤t=1023101003b.jpg" target="_blank">
1023101003b.jpg" border="0" alt="trailer hitch 520095-r2
</a>
 
After looking mine over, I saw there were more pins.
As I remember it, you first pull the front silver pin with the T shaped top.
Then remover the stabilizer pin and left eye pin.
Then the right pin, pull back and the fasthitch system comes off.
This is easiest and safest with 2 or 3 people, especially the first time
Mine has a hex bolt in the stabilizer bar that is rusted - a temporary measure we took years ago when plowing and the pin came out that I had forgotten about
 
eye pin
<a href="http://s1007.photobucket.com/albums/af192/J20601/?action=view&current=1023101002a.jpg" target="_blank">
1023101002a.jpg" border="0" alt="left eye pin
</a>
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top