560 tranny

rockint560 · Oct 14, 2010

We cannot find the hy tran dipstick or fill on a 560 Int.

Wardner · Oct 14, 2010

There is no rear frame or hydraulic dipstick on a 560. There is a 1/2 NPT check level plug on left side of rear frame. Rear frame serves as the hydraulic reservoir.

IaGary · Oct 14, 2010

Fill is the plate next to the gear shift with 3 bolts holding it in place.

Anonymous-0 · Oct 14, 2010

I just bought a 460 Diesel and that hyd fill shure seemd dumb?? Hard to use and easy to ad dirt with oil?? Bud.

IaGary · Oct 14, 2010

Drill a hole in the plate.

Weld on a 1 1/2 pipe nipple. Cap it and now you have a easier fill.

Gary

IaGary · Oct 14, 2010

Drill a hole in the plate.

Weld on a 1 1/2 pipe nipple. Cap it and now you have a easier fill.

Gary

VernMN · Oct 15, 2010

On my 460, I put a coupling in the cover plate where the belt pully gearbox would go.

Anonymous-0 · Oct 15, 2010

Thank's guys!!! I like both ideas!!Bud.

bc · Oct 15, 2010

Once you have filled it up to the overflow plug, get a dowell, stick, or tape measure that runs all the way to the bottom. Mark the full spot. No more crawling under to check the drain plug. A lot of times we run those over by an extra 5 gallons if the hydraulic suction pipe seal is leaking. Mark that on your dipstick as well.

rockint560 · Oct 18, 2010

Elaborate on the 5 gallons extra. Does the suction pipe sometimes leak causing cavitation unless extra oil is added to the system?

560 tranny

rockint560

New User

Wardner

Well-known Member

IaGary

Well-known Member

Anonymous-0

Well-known Member

IaGary

Well-known Member

IaGary

Well-known Member

VernMN

Member

Anonymous-0

Well-known Member

bc

Well-known Member

rockint560

New User

Similar threads