hello all, I just picked up a heat houser for my H ,on the in side it has printing 1944 Farmall H does any one have one that they could send a pic. of or send mesurements of the mounting hard ware of. The canves is in really good shape and with plow days comming up its gonna be nice to have on the cool days ahead I think i can use 1/2" round stock to make it out of Thank you
- Thread starter ericy
- Start date
Our Phone System is Down!
Please use the Contact us Form
We are working to resolve the issue ASAP! Thanks for your patience!
Janicholson
Well-known Member
The original was 9/16 O.D. Tubing with brackets used to hold it to the axle housing top bolt holes. There were several designs for the brackets for different tractors. Solid rod would work well if held in place with a welded on bracket, biolted to the tractor. Mock up the cloth components for position and clamp to temporary supports, then put the rods in place.
I hope you have some of the metal components. Making them all would be a little difficult. I hope others have the diagrams/photos you need.
Jim
I hope you have some of the metal components. Making them all would be a little difficult. I hope others have the diagrams/photos you need.
Jim
rustyfarmall
Well-known Member
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy