John Seasly
Member
I was wanting anyone that knows the capacity of a Farmall 400 transmission? Thanks again for all your help John.
- Thread starter John Seasly
- Start date
Anonymous-0
Well-known Member
If it's like the M, it will be 13 gallons. You could put 12 gal. in, and then see how close it is to the level plug, then add slowly.
Absent Minded Farmer
Well-known Member
- Location
- Gehl Country, Wis.
Fifteen gallons, per the manual. It also goes on to say to use one quart IH TA Transmission Lubricant Additive to every four gallons of SAE-10 or 10W engine oil. I think you can use straight Hy-Tran, instead. Someone here will let us know if you can.
Mike
Mike
John Seasly
Member
Hi Mike thank you. I read that the TA would only work with hytran so I am leaning toward all hytran. But any ideas will be appreciated. As it is a working tractor. John.
More than a M because the center section is also flooded. Both sections of the tractor are filled from the triangular cover opposite the gear shifter. Oil level in the center section won't stabilize for several minutes as the oil passage is through the unshielded ball bearing on the IPTO shaft.
Yep, fifteen gallons is right.
Yep, fifteen gallons is right.
Anonymous-0
Well-known Member
Sorry. I'd forgotten that the 400 has a TA.
The additive the book is talking about was what we used before hy-tran was concocketed. Used it with engine oil in tractors with TA. Not available any more. It was an excellent steering gear lube and IH kept it available for many years after hy-tran was on the market just for that purpose.
Similar threads
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy