484 loader install plumming problems

Anonymous-0 · Oct 3, 2010

plumbed in to power beyond valve and returned line into bottom of trans case have flow coming out of hose but loader will not work using a cross open center valve . help im stuck!!!!!

JimB2 · Oct 3, 2010

(quoted from post at 00:53:35 10/04/10) plumbed in to power beyond valve and returned line into bottom of trans case have flow coming out of hose but loader will not work using a cross open center valve . help im stuck!!!!!

Hi Jacob, see attached photo from Caseih parts for 2250 loader page 2-40,

The instructions on the side is the normal way to connect loader hydraulics to a 484 without using a power beyond adapter.

JimB

Anonymous-0 · Oct 3, 2010

thanks for the help.guessing i was told wrong about how to plumb this up guess not enough flow at the port i was told to tie into

JimB2 · Oct 3, 2010

Hi Jacob, did you install a power beyond plate like item #26?

JimB

Anonymous-0 · Oct 4, 2010

plate was installed prior seam to to have enough flow . going to use flow meeter to check soon as i can get one back

484 loader install plumming problems

Anonymous-0

Well-known Member

JimB2

Well-known Member

Anonymous-0

Well-known Member

JimB2

Well-known Member

Anonymous-0

Well-known Member

Similar threads