Fan and Generator Belt for C

Dick L · Sep 24, 2010

I have a Farmall C without a water pump and both belts are bad. I called NAPA and there book calls for a wide fan belt 34 inches long. They (NAPA) call for a choice of a 26 inch or 27 inch belt for the generator. It is now obvious that some time or other the belts were replaced with 1/2" wide automotive belts that would make due. Could anyone steer me to the correct belts? The NAPA fellow on the phone thought I needed to do some research before he ordered them for me. They do not have any of the book choices in stock.
Thanks in advance to anyone that can help.

Wisconsin Cowman · Sep 24, 2010

There are two fan belts CNH# 46869D which is a regular belt. Napa part# NBH 2528333. There is also a heavy duty belt which is cogged. CNH # 368083R1 could not find a cross for that. The generator belt is CNH # 49291D. Would call your Napa and they them cross these numbers over.

Wisconsin Cowman · Sep 24, 2010

Case IH# 49291D crosses over to gates part# 9260. Which is Napa Part# NBH 259260. Gates has no cross for the heavy duty fan belt.

rustyfarmall · Sep 24, 2010

I have the belts you need. [email protected]

Dick L · Sep 25, 2010

Thanks! They are at NAPA as of this morning and will be dropped off to me on Monday. With the swift cool wind this morning I used the C to crimp hay for an hour and it didn't get any warmer than usual with the belt. Half of the field was directly into the wind. I doubt I could have done that if it was a tractor with a water pump.

Fan and Generator Belt for C

Dick L

Well-known Member

Wisconsin Cowman

Member

Wisconsin Cowman

Member

rustyfarmall

Well-known Member

Dick L

Well-known Member

Similar threads