Farmall F-14 Clutch Release Levers

PAKEHA · Sep 24, 2010

The [b:5dc111aa9e]three clutch release levers [/b:5dc111aa9e]on my F-14 are badly worn away. Looks like someone kept using them with a seized release bearing.

Anyway, I need to rebuild them as they are like hen's teeth over here.

If you could measure and/or [b:5dc111aa9e]have the dimensions[/b:5dc111aa9e] of them so I can weld a bit on the ends to build them up (the end that press against the release bearing).

Many thanks,

Adrian

Bill in NJ · Sep 24, 2010

Don't know what the dimensions are but I would warn you to be sure they are even when done. All three levers must contact the bearing at the same time or you will have chatter like you never had before!

Doug Steinbach · Sep 25, 2010

doesn"t Gordon at Rice Equipement sell them?

PAKEHA · Sep 25, 2010

Thanks Guys.

Rice are very helpful, but unfortunately are all out of these....

Doug Steinbach · Sep 26, 2010

(quoted from post at 21:21:40 09/25/10) Thanks Guys.

Rice are very helpful, but unfortunately are all out of these....

I can get them for you, maybe. Have mine apart fixin' to put a new clutch plate in it.

PAKEHA · Sep 26, 2010

Thanks Doug, I will be interested.

Doug Steinbach · Sep 26, 2010

(quoted from post at 13:56:14 09/26/10) Thanks Doug, I will be interested.

I'll take some measurements for you tomorrow.

PAKEHA · Sep 28, 2010

A contact living just 2 blocks away came through with release levers to use as patterns. We built up mine using steel rods, and ground back to profile. Here is the result:
[

Farmall F-14 Clutch Release Levers

PAKEHA

Member

Bill in NJ

Member

Doug Steinbach

Member

PAKEHA

Member

Doug Steinbach

Member

PAKEHA

Member

Doug Steinbach

Member

PAKEHA

Member

Similar threads