184 International

Anonymous-0

Well-known Member
This is a nice tractor low boy, has 6 foot mower,and rear blade, power steering,but the man took the throw out bearing and fork out and has been using it like that because it wouldnt go into gear, he would start it in gear to mow with, will this be expensive to fix correctly? and what should I offer him to buy it???flat head 4 cyclinder and does not smoke,runs good.Thanks Rick
 
As a do it yourself (not hard) I would guess 25$.
THe worst case is 350 if the flywheel is destroyed, or a shafr stripped or worn to unusable. Jim
 
It needs a fork and throw out bearing for sure, the bearing is 35 but dont know where to find the fork? help, and what would the tractor be worth in this condition???
 
The fork should be able to be found in many salvage yards. The bearing and carrier as well, but the bearing should be replaced with new. Clutch and P. Plate would be available in many stores (here) and NAPA to name 2.
In the condition it is in I would say $1500 (just an off handed number without knowing its tire condition, and what other grief it might have internally) Jim
 
Thanks, the pressure plate is still in tractor, the tires are fair, the sheet metal is very good,comes with mower and 4 ' bade.The price is a little less than 1500 ,but would hope to make a little after working on it. Rick
 
The pressure plate could be what is actually at fault. Or damaged by the bad T/O bearing.
If it is repaired, it would be worth almost twice as much. However, never assume it is a profit making venture. It will be a great mower. Jim
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top