Farmall 300 again

ste_fano · Sep 13, 2010

Thanks for all the help on my gas problem guys. Have gas to the carb, bowl has good flow. I took off the air intake. Was full of fine rust, and some in carb opening too. I assume that it sucked in, and clogged the carb. Spark is great. Do I soak it first, then blow it out? What to do to the main jet? I am very carb stupid! Appreciate any suggestions. Thanks, Steve

CNKS · Sep 13, 2010

Disassemble as best you can (don't force anything). Get a gallon of true carb cleaner, soak everything at least overnight, in the can. There will be a tray for the small parts and the solution can be used again. Blow out with compressed air, making sure the air that goes in comes out somewhere. Put an IH kit in it. It is not a complicated carb, kit should have instructions.

DeltaRed · Sep 13, 2010

Rince the pieces with water (just dip it up and down in a 5 gal bucket of water)before air drying

Farmall 300 again

ste_fano

Member

CNKS

Well-known Member

DeltaRed

Well-known Member

Similar threads