IH 284 Thermostat

Hello my friend has an IH 284 nissan diesel engine and is looking for a thermostat for the cooling system.Any ideas what would work or where to get parts for this tractor?? thanks
 
(quoted from post at 18:06:32 09/10/10) Hello my friend has an IH 284 nissan diesel engine and is looking for a thermostat for the cooling system.Any ideas what would work or where to get parts for this tractor?? thanks

I realize this is an old thread but it shows up in searches.
[b:8b370ae348]Motorad 2028-160[/b:8b370ae348] is a 160 degree thermostat that fits the 284 with the Nissan SD16 three cylinder. It is available on Amazon. People cry about parts not being available for these. They are just not looking in the right place. These engines were used in forklifts and Nissan cars in asia. The SD22 diesel uses many of the same parts. Rods, rings, inserts, valves. Cylinder # specific gaskets are the rub. You can get them from the Phillipines fairly easily. These are great little tractors. Mizers on fuel and if treated properly will do the job for as many uyears as mine 30+
 
Your tip on the thermostat saved me a lot of money, the stat thru Case is now over $300.00.
The previous owner must have had sticker shock as well as in the past as there was no stat at all in my tractor.
Has anyone been able to crack the nut for the 284 diesel air filter element?
I have had no luck anywhere crossing by part number or by size.
This element is currently over $200.00 from Case.



(quoted from post at 11:27:34 09/15/13)
(quoted from post at 18:06:32 09/10/10) Hello my friend has an IH 284 nissan diesel engine and is looking for a thermostat for the cooling system.Any ideas what would work or where to get parts for this tractor?? thanks

I realize this is an old thread but it shows up in searches.
[b:be15de71c6]Motorad 2028-160[/b:be15de71c6] is a 160 degree thermostat that fits the 284 with the Nissan SD16 three cylinder. It is available on Amazon. People cry about parts not being available for these. They are just not looking in the right place. These engines were used in forklifts and Nissan cars in asia. The SD22 diesel uses many of the same parts. Rods, rings, inserts, valves. Cylinder # specific gaskets are the rub. You can get them from the Phillipines fairly easily. These are great little tractors. Mizers on fuel and if treated properly will do the job for as many uyears as mine 30+
 
(quoted from post at 11:05:17 11/11/13) Your tip on the thermostat saved me a lot of money, the stat thru Case is now over $300.00.
The previous owner must have had sticker shock as well as in the past as there was no stat at all in my tractor.
Has anyone been able to crack the nut for the 284 diesel air filter element?
I have had no luck anywhere crossing by part number or by size.
This element is currently over $200.00 from Case.

I found napa filter number 6270 fit perfect.

(quoted from post at 11:27:34 09/15/13)
(quoted from post at 18:06:32 09/10/10) Hello my friend has an IH 284 nissan diesel engine and is looking for a thermostat for the cooling system.Any ideas what would work or where to get parts for this tractor?? thanks

I realize this is an old thread but it shows up in searches.
[b:e45b600fea]Motorad 2028-160[/b:e45b600fea] is a 160 degree thermostat that fits the 284 with the Nissan SD16 three cylinder. It is available on Amazon. People cry about parts not being available for these. They are just not looking in the right place. These engines were used in forklifts and Nissan cars in asia. The SD22 diesel uses many of the same parts. Rods, rings, inserts, valves. Cylinder # specific gaskets are the rub. You can get them from the Phillipines fairly easily. These are great little tractors. Mizers on fuel and if treated properly will do the job for as many uyears as mine 30+
/quote]
 
Napa 6270 is for the gas 284. It fits in the housing fine, but if you look in there, it's about an inch and a half too short to seat.
 
I realize this is an old thread but it shows up in searches.
[b:8b370ae348]Motorad 2028-160[/b:8b370ae348] is a 160 degree thermostat that fits the 284 with the Nissan SD16 three cylinder. It is available on Amazon. People cry about parts not being available for these. They are just not looking in the right place. These engines were used in forklifts and Nissan cars in asia. The SD22 diesel uses many of the same parts. Rods, rings, inserts, valves. Cylinder # specific gaskets are the rub. You can get them from the Phillipines fairly easily. These are great little tractors. Mizers on fuel and if treated properly will do the job for as many uyears as mine 30+
I realize this is an old thread but it shows up in searches.
[b:8b370ae348]Motorad 2028-160[/b:8b370ae348] is a 160 degree thermostat that fits the 284 with the Nissan SD16 three cylinder. It is available on Amazon. People cry about parts not being available for these. They are just not looking in the right place. These engines were used in forklifts and Nissan cars in asia. The SD22 diesel uses many of the same parts. Rods, rings, inserts, valves. Cylinder # specific gaskets are the rub. You can get them from the Phillipines fairly easily. These are great little tractors. Mizers on fuel and if treated properly will do the job for as many uyears as mine 30+
Is 160° the OE temp?
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top