bleeding hyd

James K · Sep 5, 2010

hey guys i have a international C. last summer i had to split it to replace a freeze plug. one of the things i had to remove was the connection between the hydrolic cylinder and the pump, im positive there is air in the lines is there an easy way to fix this?

Janicholson · Sep 6, 2010

With the nose of the tractor down hill (as much as 18") use a tire pump and fittings (or regulated air pressure) to put 25 PSI in the reservoir and move the levers through their range while running the engine at 1/2 throttle or so. Jim

bleeding hyd

James K

Member

Janicholson

Well-known Member

Similar threads